Changing the TV’s Input
Normally, your TV displays the signal coming through the antenna terminal. However,
if you’ve connected another component to your TV (such as a VCR) using the
Audio/Video Inputs, you will want to be able to view the signal from that component.
To do this, you will need to switch from the “TV” input to the “Video” input, as follows;
1
With the TV turned on, Press MENU
2
You will see the Main Menu, Use the
V
CH
W
buttons to select SETUP and press
C
VOL
B
.
3
Use the
V
CH
W
buttons to select INPUT.
4
Press
C
VOL
B
to change from TV to VIDEO. Press
C
VOL
B
again to switch back
to TV.
5
Wait 7 seconds to return to normal viewing, or press MENU twice.
Changing the TV’s Input with the remote control
1
You can also change the TV/VIDEO setting with the remote
control. Press TV/VIDEO button on the remote control to
change from TV to VIDEO. Press TV/VIDEO button again to
switch back to TV.
Displaying the Current Channel
1
To quickly see the current channel, press RECALL. The current
channel will be displayed briefly.
Chapter 3 : Operating Your TV
13
1
2
3
4
1
1
