Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve
connected another component to your TV(such as a VCR & DVD) using the Video/Audio input,
you will want to be able to view the signal from the component.
To do this, you will need to switch from the ‘ TV ’ input to the ‘AV1, AV2, S-VIDEO, COMPO-
NENT’ Input, as follows.
1
With the TV on, press the MENU button. Then use
C
VOL
B
buttons until “Set-up” menu will
be displayed.
2
Use the
W
CH
V
buttons to select “ Input” item.
3
Press the
C
VOL
B
buttons to change the input source from ‘ TV ’ to ‘AV1, AV2, S-VIDEO,
COMPONENT’.
4
Wait 15 seconds, or press DISPLAY button or MENU button to return to normal TV viewing.
* COMPONENT means the Component Video Input from the DVD player etc.
* Users can also select these input modes with the TV/AV button or the INPUT button on the
remote controller.
19
Chapter 5 : Operating Your TV
h.
h.
h.
h.
h.
h.
h.
h.
h.
h.
h.
h.
401E101-R0 2005.4.4 11:34 AM 페이지19
