Recording programs
You have three options for recording TV programs:
Manual, Timer, and One touch recording.
Preparing to record a program (manual or timer)
Before you begin recording:
•Turn on the television.
•If your television is connected to:
– an antenna, set the viewing mode to “ANTENNA.”
– a cable system, set the viewing mode to “CABLE.”
•Turn the television to your VCR channel (either 3 or 4).
•Insert a video cassette (with a safety tab) into the VCR.
•If the VCR indicator is not lit, press
TV/VCR
.
Manual recording
Watching and recording the same channel
To watch and record the same channel:
1
Be certain to do the tasks in the section, “Preparing to
record a program,” above .
2
Use 0-9 or –CH/TRK+ to select the channel number.
3
Press SPEED to select the recording speed.
4
Press REC/OTR to begin recording. The REC indicator
lights.
•Press STOP to stop the recording.
Watching one channel and recording another
1
Perform steps 1-4 in “Watching and recording the same
channel,” above.
2
Press TV/VCR to switch to TV mode.
3
Use the television’s remote control to select the
television channel you want to watch. The VCR will
continue to record the program.
Daewoo Video Cassette Recorder User’s Guide
20
Watching recorded programs,
continued
19
Changing the tape speed when playing a tape in reverse
To play a tape in reverse at various speeds, press
-SLOW/SHUTTLE repeatedly. Each time you press the
button, the speed at which the tape plays in reverse
increases as follows: normal, slow, medium, fast.
Slow motion
You can view a tape during Play or Play-Pause using slow
motion.
1
Press P/S to freeze the picture.
2
Press SLOW/S/- to begin slow motion.
3
Use SLOW/S/- to speed up or down slow
motion playback.
4
Press PLAY to return to normal play.
The VCR switches automatically from slow-motion
playback to stop after a few minutes.
Stopping video cassette playback
To stop a video cassette, press STOP.
Fast forwarding the video cassette
To quickly advance the video cassette:
1
Press STOP if the VCR is currently playing.
2
Press FF. The video cassette will advance at high
speed, without picture and sound.
Rewinding the video cassette
To rewind the video cassette:
1
Press STOP if the VCR is currently playing.
2
Press REW. The video cassette will rewind at high
speed without picture and sound.
Adjusting the picture
The Digital Auto Tracking System automatically adjusts the
tracking to obtain the best possible picture. To manually
adjust the tracking during playback, press
–CH/TRK+
.
Daewoo Video Cassette Recorder User’s Guide
✔
See “Selecting cable or
antenna viewing. “p.14,
for information on setting
the viewing mode.
✔
Since the VCR has its
own TV tuner, it is not nec-
essary to turn on the TV in
order to make a record-
ing. Turning on the TV
merely allows confirmation
of proper channel settings
on your VCR.
✔
Press P/S if you would
like to momentarily stop the
recording. Press REC/OTR
to resume recording. If you
do not press REC/OTR with-
in five minutes of pressing
P/S, the VCR will automati-
cally release the pause and
stop the recording to pre-
vent damage to the tape.
