3
Press 2 to select Review/Cancel Programs. Press
MENU to cycle the programs.
4
When the program contents to be erased is
displayed, press CLEAR to cancel it.
5
Press MENU repeatedly to return to normal viewing.
One touch timer recording (OTR)
One touch timer records a program for a preset
recording time (30 minutes to 4 hours).
1
Be certain to do the tasks in the section, “Preparing
to record a program,” on p. 20.
2
Use 0-9 or –CH/TRK+ to select the channel to
record.
3
Press REC/OTR to begin recording.
4
Continue to press REC/OTR to increase the time
length of the recording.
Press REC/OTR To record
one time normal (no recording time limit)
two times
30 mins.
three times 1 hour
four times 1 hour 30 mins.
five times
2 hours
six times
3 hours
seven times 4 hours
eight times normal (no recording time limit)
•To stop the recording in progress, press and hold
STOP approximately 5 seconds.
PROGRAM1 (ONE TIME)
Channel 06 Cable
Start Time 0
4
:
3
0
A
M
End Time 0
5
:
3
0
A
M
Start Date 07
/
10
/
9
8 Fri
Tape Speed EP
Press CLEAR to cancel
Press MENU for next prog
Recording programs,
continued
Daewoo Video Cassette Recorder User’s Guide
24
23
Reviewing timer programs
If you want to review the timer programs that you set up:
1
Press MENU to display the menu.
2
Press 1 to select Timer Recordings.
3
Press 2 to select Review/Cancel Programs.
4
Press MENU to view additional timer programs.
Cancelling timer programs
To cancel timer recording programs before recording
starts :
1
Press MENU to display the menu.
2
Press 1 to select Timer Recordings.
TIMER RECORDINGS
1 Make a New Program
2 Review/Cancel Programs
Press MENU to exit
PROGRAM1 (ONE TIME)
Channel 06 Cable
Start Time 0
4
:
3
0
A
M
End Time 0
5
:
3
0
A
M
Start Date 07
/
10
/
9
8 Fri
Tape Speed EP
Press CLEAR to cancel
Press MENU for next prog
TIMER RECORDINGS
1 Make a New Program
2 Review/Cancel Programs
Press MENU to exit
Recording programs,
continued
Daewoo Video Cassette Recorder User’s Guide
✔
Be certain when using
manual or one-touch record-
ing that your recording does
not conflict with timer record-
ings that you set up.
