background image

22

Daewoo Video Cassette Recorder User’s Guide

21

Daewoo Video Cassette Recorder User’s Guide

Watching recorded programs,

continued

Rewinding the video cassette

To rewind the video cassette:

1

Press STOP if the VCR is currently playing. 

2

Press REW. The video cassette will rewind at high
speed without picture and sound.

Slow motion

You can view a tape during Play-Pause using slow motion.

1

Press P/S to freeze the picture. 

2

Press FF/REW to speed up or down slow motion
playback.

The VCR switches automatically from slow motion
playback to stop after a few minutes.

Adjusting the picture

The Digital Auto Tracking System automatically adjusts
the tracking to obtain the best possible picture. To
manually adjust the tracking during playback, press

CH/TRACKING

.

Watching recorded programs

To watch a program recorded on a video cassette tape:

•Turn on the television.
•Set the TV to channel 3 or 4 or to the video input.
•Insert a video cassette.

Playing a video cassette

If the video cassette has no safety tab(e.g., a rented video
cassette), the VCR will automatically play the tape once
you insert it. If the VCR does not play the video cassette,
press PLAY.

Searching forward while viewing a video cassette

To search forward on a video cassette, press FF. The
video cassette will advance rapidly and display a picture,
but no sound. If you repress the FF, the video cassette will
advance more rapidly. Press PLAY to return to normal
play.

Searching backward while viewing a video cassette

To search backward on a video cassette, press REW. The
video cassette will rewind rapidly and display a picture,
but no sound.If you repress the REW, the video cassette
will rewind more rapidly. Press PLAY to return to normal
play.

Pausing a video cassette during playback

To temporarily stop playback, press P/S. The picture will
freeze and the sound will stop. Press PLAY to return to
normal play.

Stopping video cassette playback

To stop a video cassette, press STOP. 

Fast forwarding the video cassette

To quickly advance the video cassette:

1

Press STOP if the VCR is currently playing. 

2

Press FF. The video cassette will advance at high
speed without picture and sound.

Summary of Contents for DV-T87N























Reviews: