background image

32

Daewoo Video Cassette Recorder User’s Guide

31

Daewoo Video Cassette Recorder User’s Guide

Using advanced features,

continued

CM Skip

This is useful for skipping commercials or program
segments. 

-

Press CM skip once during playback to advance the
tape approximately 30 seconds. 

-

Each press of the CM skip adds an additional 30
seconds up to 5 minutes. 

Display (O.S.D)

Press DISPLAY to display the tape counter, clock and 
status mode on the TV screen. 
And, by one more pressing DISPLAY before disappearing
the OSD from the screen, only the tape counter will 
remain on the screen.

Daylight-Saving Time

1

Press MENU to display the menu.

2

Press 2 to choose Clock Set.

3  

Press 2 in the Clock Set mode to toggle the setting
between AUTO DST ON and OFF. 

-

Select ON if you want the VCR’s clock to
automatically adjust for daylight-saving time. 

-

Select OFF if you do not want the VCR’s clock to
adjust for daylight-saving time.    

Use the tape counter to note
the current location of play-
back on the video cassette. 

• To reset the tape counter,

press CLEAR and the time
counter will be reset to
00:00 anywhere on a
tape. See “Searching
with the tape counter (go-
to search),” p.30/31,
for more information on
this feature.   

SPRING Forward ; Fall

Backward 

In the Spring, daylight-saving
time begins on the first Sunday
in April. Because the clock
automatically changes from
2:00 AM to 3:00 AM
(forward one hour), remember
to include the extra hour for
timer recording falling within
this time frame. 

In the Autumn, daylight-saving
time ends on the last Sunday in
October. 

The VCR clock automatically
changes from 2:00 AM to
1:00 AM (back one hour).
Therefore, it can affect your
recording length.

Using advanced features,

continued

2

Press 4 to choose Functions.

3

Press 4 to display Go-To Search.

4

The tape counter is displayed on the screen. Input
the tape counter you want to go and press REW or
FF, the VCR will search for the time counter you
want.

Marking a tape for zero search

1

Use PLAY, REW,or FF to reach the point on the tape

that you would like to mark as 0:00:00.

2

Press DISPLAY to display  the tape counter on the

screen.

3  

Press CLEAR to reset the tape counter to 0:00:00.

4  

You can continue to play the tape or perform other

functions with the VCR.

Child Lock 

To disable to usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons
on the VCR or remote won’t work.

-

To lock : Press and hold CHILD LOCK key on the
remote for approximately six seconds. 

-

To release : Press and hold CHILD LOCK key on the
remote for approximately six seconds. 

Summary of Contents for DV-T87N























Reviews: