15
DAEWOO Video Cassette Recorder User’s Guide
14
DAEWOO Video Cassette Recorder User’s Guide
Auto Play
With Auto Play turned ON (the factory default setting),the VCR automatically starts playback
when you insert a tape with its safety tab removed.
To Access Auto Play:
1.In the PREFERENCES menu,press 2 repeatedly to switch between Auto Play:ON and OFF .
• Select ON if you want a tape with its safety tab removed to start playing automatically when
inserted.
• Select OFF if you do not want a tape with its safety tab removed to start playing automatically.
Auto TV/VCR
To control whether the VCR ’s TV/VCR setting changes automatically to VCR-viewing mode
when turned on,use the Auto TV/VCR setting.
To Access Auto TV/VCR:
1. In the PREFERENCES menu,press 3 to repeatedly to toggle between Auto TV/VCR:ON and
OFF .
• Select ON to switch VCR-viewing mode on automatically when the power is turned on. The
VCR must be connected to the TV using the supplied RF coaxial cable.
• Select OFF to remain in the TV-viewing mode when the VCR is initially turned on. Leaving
Auto TV/VCR off is useful if you use A/V cables to connect the VCR to the TV and you watch
the VCR ’s picture using the TV ’s video line input.This way,the antenna/ cable signal will not
be interrupted by the VCR.
✔
Note:
• Pressing the TV •VCR button on the remote control will switch between VCR and TV-viewing
modes.When in VCR-viewing mode,VCR is displayed on the front panel.The VCR indicator turns off
when in TV-viewing mode.
EnergySaver
By default,the VCR automatically turns off after two hours of
inactivity.This can be changed in the PREFERENCES menu by
pressing the 4 button repeatedly to change the time delay or
to disable the feature altogether.
• Select OFF and the VCR will stay on until you shut it off.
• Select 1:00 ,2:00 ,or 3:00 and the VCR will turn off after
one,two,or three hours of inactivity.
Thirty seconds before automatically shutting off,the VCR
displays an on-screen message reading,The VCR will turn off
in 30 seconds.Press any key to cancel . Pressing any remote
control or VCR front panel button will halt the countdown.
If you use the VCR ’s tuner instead of your TV to view
channels,you may want to turn off this feature.
Front Panel Brightness (VCR Display)
You can change the brightness level of the VCR ’s front
panel display.In the PREFERENCES menu,press the 5 button
repeatedly to toggle between options:
• AUTO means the display brightens when the VCR is on and
dims when the VCR is off.
• BRIGHT keeps the display bright whether the VCR is on or
off.
• DIM keeps the display at a low brightness level whether
the VCR is on or off.
Tape Speed
You can choose a preferred tape speed for recording;either
Standard Play (SP)or Super Long Play (SLP).The speed
selected appears in the VCR ’s display paneland in timer and
VCR Plus+recording menus.
To Select a Preferred Tape Speed:
• In the PREFERENCES menu,press the 6 button repeatedly
to switch between SP and SLP settings.
To Override the Preferred Tape Speed:
• Press the SPEED button on the remote control.
• Set the tape speed in the timer or VCR Plus+recording
menu.
When you turn off the VCR,the tape speed reverts to the one
you have selectedas the default.
The PREFERENCES menu allows
changes to be made to a variety of
different VCR
✔
Note:
• For an explanation of recording
speeds,see the note to the left.
Recording Speeds
SP (Standard Play)Gives the best quality
recording, but fewer programs can
berecorded on the tape.
SLP (Super Long Play)Gives three times the
recording time of tapes recorded in SP
mode.
Recording Times
Cassette SP SLP
T-120 2 Hr 6 Hr
T-160 2 Hr/40 Min 8 Hr
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 EnergySaver: 2:00
5 Front Panel: AUTO
6 Tape Speed: SLP
7 Set Auto Repeat
0 Exit
Using On-Screen Menus,
c
ontinued
Using On-Screen Menus,
c
ontinued