21
DAEWOO Video Cassette Recorder User’s Guide
20
DAEWOO Video Cassette Recorder User’s Guide
✔
Note:
In order for a timer
recording to work:
To Set Up to as Many as Eight Timer Recording Programs:
1. Press the MENU button to display the VCR MAIN MENU .
2. Press the 1 button to choose TIMER RECORDINGS .
3. Press the 1 button to choose Create a New Program .
4. Select how often you want the program to record.
5. Enter the data for the program with the number buttons.
The data includes the channel number (press INPUT to
select the Video Line Input if using A/V jacks to connect
the VCR to the TV),and start and end times (including AM
or PM).The start date is automatically entered based on
the VCR clock.Both the recording date and speed can be
changed.
6. Review the information to make sure it is correct.
7. Press the MENU button to save.
Stopping a Timer Recording
To stop or cancel a timer recording in progress (even an
Express Recording):
Press and hold the STOP button for several seconds until
STOP appears in theon-screen display.
Reviewing and Clearing Programs
To review programs that you have already set up:
1. Press the MENU button to display the VCR Main Menu .
2. Press the 1 button to choose TIMER RECORDINGS .
3. Press the 2 button to choose Review Existing Progs .
4. Press CLEAR to erase or MENU to see the next saved timer
recording program.
Timer Recording
You can program up to eight different broadcasts to be recorded.
• The VCR ’s clock must be set correctly.
• Insert a tape with its safety tab in place and enough tape to record the program.
• If you ’ve set up the VCR for a cable box for all channels,the output of your cable box appears in the
channel item of the Timer Recording menu.
• PROGRAMS OVERLAP appears if two programs whose times overlap are entered.
• TIMER appears in the display when you turn off the VCR and a timer recording has been set.TIMER
flashes if there is no tape in the VCR when a timer recording has been set and the unit is turned off.
• For a cable box or satellite receiver,turn it on and tune it to the channel you want to record before the
recording is to begin.
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
0
How often should this
program record?
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0
VCR Feature,
c
ontinuación
Program 1 (One time)
Channel 104
Cable
Start Time
12:00 AM
End Time
01:30 AM
Start Date
11/16/01 Fri
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog
Cancel Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
Copying and Editing Tapes Using Two VCRs
Use one VCR as the playback VCR and the other as the recording
VCR.
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel (either 03,04,or the TV
’s Video Line Input).
3. If you connected your VCR using the ANT.IN and RF OUT
jacks,tune the recording VCR to channel 3 or 4 —whichever is
selected on the back of the playback VCR.
If you have connected your VCR using the A/V jacks ,press INPUT
on the recording VCR ’s remote control to select the Video Line
Input.Select L1 for the jacks on the back of the VCR or L2 for the
jacks on the front.
4. Insert the tape you want to copy into the playback VCR.Insert a
tape with its safety tab in place into the recording VCR.
5. Press PLAY on the playback VCR to begin playback.When you
reach the point on the tape or program where you want to begin
copying,press the PAUSE button.You may need to adjust the
tracking.
6. Press the RECORD button,then press PAUSE on the recording
VCR.
7. Press the PAUSE buttons on both VCRs at the same time to begin
copying the tape.
8. To edit segments that you do not want to copy:
• Press PAUSE on recording VCR to pause copying.
• Locate the next segment you want to copy on the playback VCR
by using FWD,REV,and PLAY,and then press PAUSE.
• Press PAUSE on both VCRs at the same time to resume
copying.
9.Press STOP on both VCRs when finished.
Recording Broadcast Stereo TV or SAP (Second Audio Program)
Some TV programs are broadcast with stereo audio or SAP (Second Audio Program).
1. Turn on the TV and tune it to the VCR viewing channel (either 03,04,or the TV ’s Video Line Input).
2 .Insert a tape with its safety tab in place.
3. If your VCR viewing channel is 3 or 4,make sure the VCR indicator appears in the front display.If not,press the TV
•VCR button on the remote control to turn it on.
4. Press the SPEED button on the remote control if you want to override the preferred Tape Speed setting.The tape speed
indicator appears on the TV screen.
5. Select the channel or Video Line Input to be recorded.
6. Set the Reception:STEREO/MONO/SAP feature for the type of audio you want to record.
7. Press RECORD to start recording.
8. Press STOP when finished.
Caution :
The unauthorized recording of satellite
broadcasts,television programs,or other
copyrighted materials may infringe the
rights of others.
IN
OUT
TO TV
PLAYBACK VCR
RECORDING VCR
CH
ANT. IN
OUT
IN
AUDIO
R
L
VIDEO
3 4
RF OUT
CH
3 4
OUT
IN
AUDIO
R
L
VIDEO
ANT. IN
RF OUT
CABLE BOX or ANTENNA
VCR Feature,
c
ontinuación