background image

i

DAEWOO Video Cassette Recorder User’s Guide

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to  persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

IMPORTANT SAFEGUARDS

In addition to the careful attention devoted to quality standards in the manufacture of your video
product, safety is a major factor in the design of every instrument. However, safety is your
responsibility too. This sheet lists important information that will help to assure your enjoyment
and proper use of the video product and accessory equipment. Please read them carefully before
operating and using your video product.

Installation

1

Read and Follow Instructions- All the safety and operating instructions should be read before

the video product is operated. Follow all operating instructions.

2

Retain Instructions- The safety and operating instructions should be retained for future

reference.

3

Heed Warnings-Comply with all warnings on the video product and in the operating

instructions.

4

Polarization- This video product is equipped with a polarized alternating -current line plug

(a  plug having one blade wider than the other). This plug will fit into the power outlet only
one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. To           
prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or 
other outlet  unless the blades can be fully inserted without blade exposure. If you need an 
extension cord, use a polarized cord.

5

Power Sources-This video product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your video dealer or local power company. For video products intended to operate 
from battery power, or other sources, refer to the operating instructions.

6

Overloading- Do not overload wall outlets of extension cords as this can result in a risk of fire

or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or
cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire

i

Safety information

Summary of Contents for DV-T8F4N-PS























Reviews: