Daewoo DVK-47N User Manual Download

Page: 16 / 21

Daewoo Video Cassette Recorder User’s Guide

Press 2 to select Review/Cancel Programs. Press

MENU to cycle the programs.

When the program contents to be erased is
displayed, press CLEAR to cancel it.

Press MENU repeatedly to return to normal viewing.

One touch timer recording (OTR)

One touch timer records a program for a preset
recording time (30 minutes to 4 hours).

Be certain to do the tasks in the section, “Preparing
to record a program”.

Use 0-9 or –CH/TRK+ to select the channel to
record.

Press REC/OTR to begin recording.

Continue to press REC/OTR to increase the time
length of the recording.

Press REC/OTR To record

one time . normal (no recording time limit)

two times

30 mins.

three times 1 hour
four times 1 hour 30 mins.

five times

2 hours

six times

3 hours

seven times 4 hours
eight times normal (no recording time limit)

•To stop the recording in progress, press and hold

STOP approximately 5 seconds.

PROGRAM1 (ONE TIME)

Channel 06 Cable
Start Time 0

End Time 0

Start Date 07

01 Sat

Tape Speed EP

CLEAR Cancel
MENU For next program

Recording programs,

continued

✔

Be certain when using

manual or one-touch recording
that your recording does not
conflict with timer recordings
that you set up.

Reviewing timer programs

If you want to review the timer programs that you set up:

Press MENU to display the menu.

Press 1 to select Timer Recordings.

Press 2 to select Review/Cancel Programs.

Press MENU to view additional timer programs.

Cancelling timer programs

To cancel timer recording programs before recording
starts :

Press MENU to display the menu.

Press 1 to select Timer Recordings.

TIMER RECORDINGS

1 Make a New Program
2 Review/Cancel Programs

MENU Exit

PROGRAM1 (ONE TIME)

Channel 06 Cable
Start Time 0

End Time 0

Start Date 07

01 Sat

Tape Speed EP

CLEAR Cancel
MENU For next program

TIMER RECORDINGS

1 Make a New Program
2 Review/Cancel Programs

MENU Exit

Recording programs,

continued

Summary of Contents for DVK-47N






















Search results

Summary of Contents for DVK-47N

Reviews:

Related manuals for DVK-47N

Brands by name

Popular brands

Daewoo DVK-47N, User Manual

Search results

Summary of Contents for DVK-47N

Reviews:

Related manuals for DVK-47N

Brands by name

Popular brands