|
20
|
Synthetic 20°C
Baby Care
Select the Baby Care program to wash baby clothes, 100% cotton products, and
clothing requiring steam wash and bleaching.
"Select the Baby Care program to steam wash baby
clothes and cotton products. The program helps clean your laundry
hygienically with hot water and three rinse cycles."
- The water temperature is maintained at 80°C without any changes during the cycle.
- If the steam wash causes excessive bubbles, you can remove them by repeating
the process of Drain(spin)→ Water Supply(rinse+spin)→ Start/Pause.
- Do not wash clothes that are not resistant to heat.
- Press the Start/Pause button and then select other buttons to change the setting
while the washer is running.
- Three rinse cycles apply automatically for sensitive baby skin.
Note
- Please check whether the laundry is suitable for steam wash (Pure cotton and
100% cotton baby clothes, diapers, etc.).
- Wash white and bright-colored clothes and dark items separately.
Caution
Open the door and load the washer with clothes. Add detergent and fabric
softener into the detergent and softener containers respectively and then
close the door.
- Turn detergent and softener containers clockwise to close them tight before use.
1
Press the Power button slightly for a second.
2
Press the Program button to select 'Baby Care'.
- The water temperature of 87
℃
, three rinse cycles, and strong spin cycle are selected automatically.
Tip
Press the Add Rinse button to change the number of rinse cycles.
(Up to 5 rinse cycles are available)
3
Press the Start/Pause button.
- The wash cycle starts with water supply after the door is locked.
4
2
3
4
미니(1.5)_DWD-CV702WP(영).indd 20
2017-11-24 오후 6:37:28