background image

9

FULL AUTOMATIC COURSE

1. FUZZY COURSE (SENSOR);

 This selection is for general washing except extraordinary clothes.

 It is possible for changing water temperature what you want.

 Artificial brain sensor selects properly the various kind of washing condition such as 

washing time, rinse times, spin time and water level.

2. BLANKET COURSE;

 This selection is effective for blanket, curtain, carpet, etc ...

 Do not wash general-electric blanket absolutely. (4kg’s limitation for one-time-wash)

Procedure to press the button;

4. LIGHT COURSE

 This selection is effective for washing light or less dirty wash. Procedure to press the button;

 Washing time, Rinse times and spin time are selected by artificial brain sensor automatically depend on

 Also, it is possible for changing water temperature what you want.

amount of Laundary.

3. WOOL COURSE

 This selection is effective for wool clothes.

Do not put leather clothes, or chamois clothes into the washing tub for washing.
It may cause shrinkage or deformation to the clothes.

 Please use the neutral deter gents only

.

 The water temperature is fixed to "COLD"

 The water level is fixed to "MEDIUM".

 1.5kg’s limitation for one-time-wash.

WASHING PROCEDURE AND COURSE SELECTION

POWER

START

HOLD

COURSE

POWER

START

HOLD

adjust to
"WOOL"     

POWER

START

HOLD

COURSE

adjust to water 
level and water 
temperature and 
washing time, rinse times,
spin time.

6. ECONOMY COURSE;

 This selection is useful to reduce water consumption and washing time for less dirty

 It is possible to use exclusive button.

clothes.

POWER

COURSE

START

HOLD

adjust to
"ECONOMY"

adjust to
water level and
water temperature and
washing time, rinse times,
spin time.

adjust to
"BLANKET"

COURSE

POWER

START

HOLD

adjust to
"LIGHT"     

5. HEAVY COURSE

 This selection is effective for blue-jean, climbing clothes, ruck sack, sports wear, etc ...

 Washing time, Rinse times and spin time are selected by artificial brain sensor automatically depend on

 Also, it is possible for changing water temperature what you want.

a mount of Laundary.

COURSE

POWER

START

HOLD

adjust to
"HEAVY"     

DWF-200/240M(101) 

 

97.1.19 

4:21 

PM 

 

˘

`

9

Summary of Contents for DWF-200M

















Reviews: