Cleaning the filters
Remove the cylinder from the
vacuum cleaner as described on
the previous page.
Rotate the cylinder lid anti
clockwise while holding on to the
cylinder body and pull the cylinder
head and filter assembly away.
Remove the filter assembly from
the cylinder lid by rotating the lid
anti clockwise.
The HEPA filter is located in the
filter assembly and can be simply
pulled out.
Tap the filter assembly and filter
over a dustbin to remove excess
dust and debris
Rinse the filter, filter assembly and cylinder under warm water until
thoroughly clean.
Leave to dry for 24 hours before reassembling
Cylinder HEPA filter
Tornado F1 Upright Vacuum
FLR00049
User Manual