Safety Section
-9-
Parking brake
Pull the lever BACK to engage the
parking brake.
Push the lever FORWARD to release
the parking brake.
Applying the parking brake puts the transmission in
NEUTRAL. The parking brake must be applied
when leaving the lift truck and when starting the
engine. If the operator leaves the seat without
applying the parking brake, an audible alarm will
sound.
WARNING
When leaving machine apply parking brake!
Parking brake is not automatically applied.
Alarm will sound if parking brake is not applied.
WARNING
Correct adjustment is necessary to provide
adequate braking. See the MAINTENANCE section
for adjustment procedures. The lift truck may creep
at engine idle and can cause damage, injury or
death. Always apply the parking brake when
leaving the lift truck. The parking brake is NOT
automatically applied.
