1. CONTROL BOX
Regulates the operation of the motor and controls the inside temperature of the
refrigerator.
2. SHELF
Has full width and can slide out.
3. MAGNETIC DOOR SEAL
Keeps the refrigerator virtually airtight all along the edge, but is nevertheless easy to open.
4. USABLE RACK
for cans or jars.
5. BOTTLE RACK
for bottles, cans or jars.
6. COVER CASE DRAW
7. CASE DRAW
for bottles, cans or jars
8. CASE VEGETABLE
for vegetables.
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the inside
with a damp cloth.
2. Keep the door open and insert the power supply cord into the socket.
3. Turn the thermostat dial to “Max”.
Close the door and let the refrigerator operate for 15-20 minutes.
You can control the inside temperature by
turning the thermostat dial.
"Max" means greater cooling power.
"Min" means less cooling power.
The dial does not have to be set exactly on the
letters, but can be any place in between.
NOTE
: Wait 3 to 5 minutes before restarting if you unplug the machine. Unit
may fail to operate properly if restarted too quickly.
HOW TO OPERATE
NAMES OF THE PARTS
3
4
1
6
7
3
4
5
2
8
Defrost the refrigerator when the frost accumulated on the inside surface of
the refrigerator is about 5mm(1/5inch) thick.
Set the thermostat dial to “OFF”. Remove foods. Defrosting usually takes a few
hours. To defrost quickly remove all foods from the refrigerator and leave door open.
Never use a knife or other metal instrument to remove ice/frost from the inside
surface of the refrigerator.
After defrosting , return the thermostat dial to the desired position to start refrigerating
again.
