3
3)
Slide the door down,away from the hinge pin located
on the top of the door.
4)
Remove the plastic cover from door hinge first.Then
unscrew the two screws from top bracket and replace
on the other side.
5)
To install the bracket on the left side of the appliance,
screw the two screws through the bracket and into the
top of the appliance.Slide the door back on to the top
hinge.Ensure the door is face up.Replace the plastic
cover on the top bracket by pressing down until it
clicks into position.
6)
Screw the bottom hinge into place on the new side.
Replace the foot on the other side.
7)
Check that the door is aligned horizontally and vertically
and that the seals are closed on all sides before finally
tightening the bottom hinge. Readjust the leveling feet.
2.3
Door
Space Requirements
The unit's door must be able to open fully as shown.
W
×
D
≥
800mm
×
780mm
W
D
