background image

 

2.4

 

Levelling

 the Unit 

To do this adjust the two levelling feet at the front of the unit.   
If the unit is not level, the door and magnetic seal alignments 
will not be covered properly. 

2.5

 

Cleaning

 Before Use 

Wipe  the  inside  of  the  unit  with  a  weak  solution  of  bicarbonate  soda.  Then  rinse  with  warm 
water using a 'Wrung-out' sponge or cloth. Wash the shelves and salad bin in warm soapy water 
and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth. 
If you require more information refer to the Cleaning section. 

2.6

 

Before Using Your Unit 

Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working 
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled. 
 

◆ 

Before Plugging in 

                 

You must check that you have a socket which is compatible with the plug supplied 

                  with the unit.   

◆ 

Before Turning On! 

                 

Do not turn on until two hours after moving the unit. The coolant fluid needs time to 

                  settle. 

2.7

 

Interior Accessories 

Various  glass  or  plastic  storage  shelves  are  included  with  your  appliance  -  different 
models have different combinations. 
You should always slide one of the full size glass storage shelves into the lowest set of 
guides, above the fruit and vegetable containers, and keep it in this position. To do 
this,  pull the  storage  shelf  forward until  it  can  be  swivelled  upwards or downwards 
and removed. 
Please do the same in reverse to insert the shelf at a different height. 

          In order to make the most of the volume of the fresh food storage compartment and   
          frozen-food storage compartment, the user can remove one or more shelves, drawers, out   
          of the appliance, according to your daily use. 
 
 

3.

 

PRODUCT OVERVIEW 

Summary of Contents for FR-031DDRVBE1












Reviews: