4
WHAT TO DO...
When out of operating for a long time:
• Remove the power supply cord.
• Dry your refrigerator opening the door for 2-3 days.
When you get ready to move:
• Securely fasten removable interior parts (or move and package them
separately)
• Do not lay your refrigerator horizontally, or compressor may be damaged.
When you need service: Before you call for service make sure
you need it, check a few things noted below for yourself first.
If refrigerator is not operating:
• Is the power supply cord unplugged?
• Is home fuse blown or circuit breaker off?
If refrigerator is warmer than usual:
• Has the door been open frequently or for a long period?
• Is refrigerator overcrowded-preventing good air circulation?
• Is the hot thing stored without cooling?
• Is the clearance between refrigerator’s side and the wall allowed
sufficiently?
If there are unusual sounds:
• Is refrigerator placed on the level?
• Are foreign objects behind the refrigerator?
• Are dishes on refrigerator shelves vibrating?
If so, rearrange the dishes.
3
HOW TO CLEAN
Cleaners: The cleaners noted below are available. Never use harsh, abrasive
cleaners, heavy-duty cleaners, or solvents on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and
for periodic waxing, use silicon wax.
Evaporator: When refrigerator needs defrosting turn thermostat dial to “OFF”.
Do not use sharp instruments.
Refrigeration Section: Wash shelves and other removable parts in warm
sudsy water, rinse and dry. Wash interior with baking soda solution (3 table
spoons to one quart of water) or warm sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
The Finishing Touch: Replace all parts and return thermostat dial to desired
setting.
HOW TO INSTALL
■
Install refrigerator in a convenient location away from extreme heat and cold.
Allow sufficient clearance between the refrigerator and side wall so the door
will open for a fully usable interior. Refrigerator is not designed for recessed
installation.
■
Select a place with strong level floor.
■
Allow 10cm of space between the refrigerator’s
side and the wall.
■
The electrical plug must be accessible without
moving the set.
10 cm
Changing the internal light bulb.
Disconnect the refrigerator from the main supply by removing the plug.
Replace the bulb with one of the correct type and size(15Watt SES E14 Base)
Only : FR-143R-DS
