background image

11

When not operating for a long time

Remove the power supply cord.
Dry your refrigerator by opening the door for 2-3 days.

When you get ready to move

Securely fasten movable interior parts (or remove and pack them separately)
DO NOT lay down your refrigerator horizontally, or the compressor may be damaged.

If the refrigerator is not operating:

Is the power supply cord unplugged?
Is the home fuse or circuit out of order?

If the refrigerator is warmer than usual:

Has the door been opened frequently or for a long period?
Are there any hot foods or anything that has been stored without cooling?
Is the clearance between the refrigerator and the wall given sufficiently?

If there are unusual sounds:

Is the refrigerator placed on a levelled floor?
Are there any foreign objects behind the refrigerator?
Are dishes on refrigerator shelves vibrating?

Before you call for service, please check the following points first.

WHAT TO DO...

CAUTION

Improper use of the grounding plug can result in electric shock. If a grounding
adapter is used, make sure the receptacle box is fully grounded.

POWER CORD REPLACEMENT

If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a simmilary qualified person in order to avoid a hazard.

DANGER

Risk of child entrapment. Before you throw away your old refrigerator or freezer : Take
off the doors. Leave the shelves in place so that children may not easily climb inside.

Summary of Contents for FR-2703













Reviews: