background image

7

How to use the interior parts

The first case or drawer of the refrigerator compartment can be
used either as a vegetable case or as a chilled case for your
convenience.

The temperature in the chilled case is somewhat lower than the
vegetable one, so you can keep food more fresh.

If you store vegetables and fruits in the chilled room mode, they can be frozen.

If you store fish in the chilled room mode for a long time, it can deteriorate. Store it in the freezer compartment.

Do not place foods close to the cold air spout, for it can weaken cold air circulation.

Pull out ice cubes
maker and fill with
pure water.

When ice cubes are
ready, turn the handle
clockwise to separate.

If ice cubes are not to fall easily, turn
it to the end several times.

Do not turn the separation handle if
the ice cubes are not ready, for they
gets sticky on the ice tray and case.

Do not use ice cubes
case to make big ice
block, for it can be
broken.
Pull out the case, clean
and dry it if not used
(for a long time).

Do not pour water too much, for
the ice cubes made get sticky and
do not to separate easily.

Keep in mind not to go beyond the
water line with an arrow mark
when filling with water.

For Vegetable Case

Be sure to check the handle bar direction

For Chilled Case

6

Temperature Control

When this refrigerator is first plugged in, the temperature mode is  set to [Middle].

Push the FREEZER SET. button and the setting
temperature changes as the figure shows.

Push the REFRIGERATOR SET. button and the
setting temperature changes as the figure shows.

>>> Sequential Temperature Change <<<

>>> Sequential Temperature Change <<<

Foods in the refrigerator can be frozen if the ambient
temperature of the refrigerator is below 5 .

When you want faster freezing, push the SUPER
FREEZER. button, then  QUICK icon turns on and
the mode starts. Just push the button once again
when you want to stop the mode.

Faster Freezing...

When you want faster refrigerating, push the
SUPER REFRIGERATOR. button, then  QUICK
icon turns on and the mode starts. Just push the
button once again when you want to stop the mode.

Faster Cooling or 
Refrigeration

The inside temperature varies according to door
openings, amount of foods, surrounding temperature
etc.
The mode ends automatically and it returns to the
previously set mode.

For example) The refrigerator is working on [LOW Mode]. --> 

[SUPER FREEZER.] starts and ends. --> 
Returns to [LOW Mode] again.

The inside temperature varies according to door
openings, amount of foods, surrounding temperature
etc.
The mode ends automatically and it returns to the
previously set mode.

For example) The refrigerator is working on [LOW Mode].

--> [SUPER REFRIGERATOR.] starts and
ends. --> Returns to [LOW Mode] again.

Freezer Compartment

Refrigerator Compartment

Optical Sensor

Vegetable Case & Chilled Case

Ice Cubes Maker

Caution

Summary of Contents for FRS-231EAL













Reviews: