background image

12

How To change lnterior the Light Bulb

Change of Freezer Lights 

Remove screw caps at the
bottom of the light cover
with a tiny tip screw driver.

Remove the 2 screws
retaining the light Hold
cover.

Hold the bottom of the light
cover and pull for ward to
remove.

Change the light bulb.

Follow the reverse order   

of disassembing after 
changing the light

Remove screw caps at the
bottom of the light cover
with a tiny tip screw driver.

Remove the screws
retaining the light cover.

Hold the bottom of the lihgt
cover and pull forward to
remove.

Change the light bulbs.

Follow the reverse order   
of disassembing when
assembling back.

Change of Refrigerator Lights 

Snap out hte bottom hook
of light cover with a flat tip
screw driver.

Hold down the light cover to
pull out.

Change the light bulb

.

Follow the reverse order after
changing the light.

Refrigerator Top Lights

Refrigerator Bottom Lights

The lamp shall be replaced only by a service agent or similarly qualified person.

Before You Call for Service...

Please checkup the following troubleshooting tips before you call for service !

13

Problem

Checkup Point

Action

Is the refrigerator unpluged ?

Is the temperature set to [Low Mode] ?

Is the refrigerator under direct sunlight or is any
heat appliance placed near it ?

Is the space between refrigerator back and the
wall too close ? 

Plug in the refrigerator.

Set the temperature mode to Middle or High.

Move to a place where there is no direct
sunlight, no heat appliences around.

Keep sufficient space (more than
10cm)between refrigerator back and the wall.

It never gets cold inside.
Freezing & refrigerating is
not so good.

Is temperature set to [Strong] ?

Is surround temperature too low ?

Is the food with much moisture stored close to the
cold air spout ?

Set the temperature to [Middle] or [Low].

Foods can be frozen if ambient temperature is
below 5 . Move to a place where the
temperature is over 5 .

Place foods with moisture on the shelves close
to the doors.

Foods in the
refrigerator get frozen.

Is floor beneath the refrigerator uneven ?

Is the space between refrigerator back and the
wall too close ?

Do  any objects stuff touch the refrigerator ? 

Move the refrigerator to a level and even floor.

Keep sufficient space.

Remove any object a way which touches the
refrigerator.

Strange sound from
the refrigerator

Is the food stored uncovered or unwrapped ?

Are the shelves and pockets stained with food
stuff ?

Is the  food stored too long ?

Be sure to cover and wrap the foods.

Clean them regularly.  Once smell gets
soaked to those parts, it is not easy to
remove.

Do not store foods for so long.

A refrigerator is neither a perfect nor a
permanent foods keeper.

Odor or disgusting
smell from the inside

Summary of Contents for FRS-231EAL













Reviews: