The LCD light turns on in the following case to help you control the panel easily ;
When the refrigerator is pluged in
When you push a button (The background light turns on first, then button mode is activated.)
When you open the door
If you push a button when the backlight is off, only the backlight turns on and it does not affect any other button mode.
The LCD light turns off in the following case to save energy consumption ;
1 minute after power plug in
10 seconds after the door is closed
No other button is pushed for more than 1 minute after button selection
When you look at LCD display from side or down, not from front, the display (letters, icons and signs) can look faded or dim.
Control Panel
5
Optical Sensor in the top center of the panel
senses the amount of light surrounding the
refrigerator.
When it decides that it is dark (night), Silence
Mode starts. Refrigerator works on in minimum
operation condition, so it makes little or
less working noise.
[Notice] Do not let the Optical Sensor be
covered by memo sheet (Post-it) etc.
It shows that the digital control system is
working the refrigerator. (The icon is always on
while the refrigerator is working.)
As long as the refrigerator is working
deodorization is always on.
Interior lights of refrigerator turn off when the doors are open for more than 10 minutes.
In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with
1 minute interval.
Children may push any button on the panel for
fun, resulting in disorder of temperature and
function of refrigerator. Press this button to lock
out this case and to keep temperature and
function setting.
Push Lock button again for more than a second
to stop it.
If you fill the refrigerator with much foods or in
case of frequent door openings, Speed Mode
starts automatically to maintain optimal condition
of temperature.
If you need total silence from the refrigerator just
push sleep button.
This mode works for maximum 12 hours and
then it returns to the previously set mode.
When you want to stop the mode, just push the
button again and it also returns to the previously
set mode
LCD Background Light
Optical Sensor
4
Never install the refrigerator on a wet, watery floor or where water can easily gather.
Check the following before power connection.
Connect power plug only to a grounding wall receptacle (an earthed mains).
Do not plug refrigerator power together with other appliances to a same receptacle(socket).
Do not use an adapter plug or an extension cord.
Do not let power cord be crushed down by other (heavy) objects .
If you hear strange noise or strong chemical odor or find smog etc. from the refrigerator after
power plugin, pull out the plug immediately and call the service.
Wait about 5 minutes before you plugin again in order to prevent any
damage to the compressor and electrical devices of refrigerator.
Wait 2~3 hours until the inside gets cold enough after first power plugin, then store foods in.
(There can be some peculiar smell of plastic parts at initial operation of refrigerator after plugin.
The smell fades away as refrigerator works and doors are opened and closed.)
Precautions in installation and power connection
To prevent fire, electric shock or leakage
Precautions in use
To prevent personal injury, fire, electric shock etc. read this user guide carefully before use and
keep it at hand for any reference.
Read these safety instructions carefully before use and follow precautions for your safety.
E
gg case Egg cradle User guide
Accessories
Installation Guide
