3
Installation Guide
↜
Read these safety instructions carefully before use and
follow precautions for your safety.
Precautions in installation and
power connection
¥
To prevent fire, electric shock or leakage.
⇡
Never install the refrigerator on a wet, watery floor or
where water can gather easily.
⇢
Check the following before power connection.
Connect power plug only to a grounded wall socket
(an earthed mains).
Do not plug refrigerator power together with other
appliances to the same socket.
⇣
Do not use an adapter plug or an extension cord.
⇤
Do not let the power cord be crushed by other (heavy)
objects.
Do not immediately switch “ON” the power to the unit the
day it was installed. Wait for 4 hours for the refrigerant
to settle. After switching “ON” the unit, if you hear a
strange noise, smell chemical odour or smoke, etc,
shut “OFF” the power immediately, remove the power
cord by pulling the plug and engage a qualified service
technician.
Do not immediately switch “ON” the power to the unit
after it’s been switch “OFF”. Wait for 5 minutes then
switch “ON the unit. This prevent damages to the
compressors and other electrical devices.
Wait 2 to 3 hours for the freezer and refrigerator to get
cold before putting in food and drinks. (There can be
some smell of plastic parts on initial operation of the
refrigerator after plugging in. The smell fades away
as the refrigerator works and doors are opened and
closed.)
Precautions in use
¥
To prevent personal injury, fire, electric shock etc. read
this user guide carefully before use and keep it at hand
for reference.
¥
Accessories
Instruction Manual
Egg tray
