8
once
P-HI
100%
twice
P-80
80%
3 times
P-60
60%
4 times
P-40
40%
5 times
P-20
20%
1) Connect the mains lead to an electrical outlet.
2) Open the oven door once to use the oven. The display lights up and the oven is ready to work.
3) After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
4) Close the door firmly.
5) The oven door can be opened at any time during operation by pulling the door.
The oven will automatically shut off. To restart the oven, close the door and then press START button.
6) Each time a button is pressed. a BEEP will sound.
7) The oven will be turned off automatically when not in use for 10minutes after working. Open the oven door for using the
oven and then its display will turn on again.
8) When STOP/CLEAR button is pressed during the oven operation, the oven stops cooking and all information retained.
To erase all information, press STOP/CLEAR button once more. If the oven door is opened during the oven operation, all
information is retained.
9) If START button is pressed and the oven does not operate, check the area between the door and door is closed securely.
The oven will not start cooking under the door is completely closed or the program has been reset.
Wattage output chart
• The power-level is set by pressing POWER button. The chart shows the display, the power level and the percentage of
power.
NOTE :
Make sure the oven is properly installed and plugged into the electrical outlet.
OPERATION PROCEDURE
Press POWER button
Power level (Display)
Approximate Percentage of Power
Summary of Contents for KOR-6L9R5S
Page 5: ...4 1 OUTER DIMENSION EXTERNAL VIEW 270 446 346...
Page 26: ...25 WIRING DIAGRAM...
Page 28: ...27 PCB MAIN MP1 measurement point MP2...
Page 29: ...28 PCB SUB...
