K1000896E Operation and Maintenance Manual
Inspection, Maintenance and Adjustment 4-17
CHECK LEVEL OF WINDOW WASHER
LIQUID
1.
Check fluid level in windshield washer
tank, in the storage box of the rear of the
seat.
2.
Open fill cap and add fluid.
NOTE:
Use a washer liquid that is
rated for all seasons. This will
prevent freezing during cold
weather operation.
INSPECT THE BUCKET TEETH AND SIDE
CUTTERS FOR SIGNS OF WEAR
1.
On a daily basis, inspect bucket teeth to
make sure that tooth wear or breakage has
not developed.
2.
Do not allow replaceable bucket teeth to
wear down to the point that bucket adapter
is exposed. (Figure 22)
NOTE:
These instructions are only for
Daewoo OEM buckets. If you
are using other manufacturers'
buckets, refer to their specific
instructions.
INSPECT SEAT BELT FOR PROPER OPERATION
INSPECT THE STRUCTURE FOR CRACKS AND FAULTY WELDS
1.
During the daily walk-around inspection and when greasing the machine, look for any visible damage
to the machine. Repair or replace any damaged parts before operating machine.
CHECK THE OPERATION OF ALL SWITCHES
1.
Verify working condition of all switches before starting engine.
CHECK THE OPERATION OF ALL EXTERIOR LIGHTS, HORN AND CONTROL CONSOLE
INDICATOR AND MONITOR LIGHTS
1.
Turn engine starter switch to "ON" position and observe all indicator lights.
2.
Restore operation of any light bulbs that do not turn "ON" at this time.
3.
Sound the horn. Repair or replace if required.
4.
Turn "ON" and inspect all exterior work lights. Replace any monitors, burned out bulbs or cracked or
broken housings or lenses.
Figure 21
Figure 22
Summary of Contents for Mega 250-V
