19
2-1. Wash Program
1) Wash Programs
1
The default washing times and water levels apply for all the programs without sensing the load.
2) Wash Times
* Washing time after the water temperature reaches the target level.
1
The washing time consists of heating cycle and post-heating main wash cycle. The time displayed for
heating cycle elapses immediately on completion of heating cycle or remains unchanged until the heating
cycle is over.
2
The heating cycle is complete when the water temperature reaches the target level.
- If the water temperature doesn't reach the target level after the heating cycle under the Baby Care, Cotton
40, Cotton 60, Intensive 40, Intensive 60, program, the time on display stops declining and an additional
heating cycle applies for 10 minutes. If the water temperature doesn't reach the target level after the
additional cycle, the heating cycle is suspended and the main wash cycle starts.
3
The water heater does not resume its operation after it is turned off when the water temperature reaches the
target level.
1. MINI 1.0: D-CV701*, WFWM11*
2. MINI 1.5: ODW30-999B, ODW30-999G, DWM30-999PG, WFWM12*
2. Program Functions
Category
Program
Water level
Time of water
supply
Heating time
Wash time
Total wash time
Normal
Default
2min
-
8min
10min
Delicate
Default
2min
-
11min
13min
Baby Care
Default
2min
47min
15min
64min
Night Time
Default
2min
-
12min
14min
QUICK15
Default
2min
-
4min
6min
INTENSIVE
Default
2min
-
10min
12min
INTENSIVE40
Default
2min
15min
25min
42min
INTENSIVE60
Default
2min
60(NO H20min
228min
310min
Category
Program
Water level Time of water
supply
Wash 1 time Heating time Wash 3 time
Total wash
time
Normal
Default
2min
4min
-
4min
10min
Delicate
Default
2min
5min
-
6min
13min
Baby Care
Default
2min
2min
47min
13min
64min
Speed up
Default
2min
4min
-
0min
6min
Tub Clean
Default
2min
5min
-
5min
12min
