3.1.37. Oil seal
•
Take off the rear oil seal using an oil seal
disassembling jig.
•
If only the inside guide ring is removed,
use a special tool to take off the outside
seal.
3.1.38. Flywheel housing
•
Loosen the housing fixing bolts disas-
semble the flywheel housing.
3.1.39. Cam shaft and tappet
•
Remove the cam shaft gear.
•
Take off the cam shaft gear thrust washer.
•
Take out the cam shaft using care not to
damage the cam shaft.
•
Slide out the tappets by hand.
3.1.40. Crankshaft gear and oil pump idle gear
•
Loosen the socket head bolts and take
out the oil pump idle gear.
•
Use a puller to remove the crankshaft
gear.
- 39 -
EAMD043I
EAMD044I
