3.3.8. Flywheel
•
Install a guide bar into a bolt hole on the
crank shaft, and lift the flywheel to align
the dowel pin with the pin hole on the fly-
wheel for temporary assembly opera-
tion.
•
Install bolts in the remaining holes, take
out the guide bar, then install a bolt in
the hole where the guide bar had been
inserted.
•
Tighten the fixing bolts using a torque
wrench in a diagonal sequence to spec-
ified torque.
3.3.9. Timing gear case
•
Mount gasket using dowel pin on the
cylinder block.
•
Install the timing gear case by aligning
the dowel pin with the dowel pin hole on
the timing gear case.
- 62 -
EAMD081I
EAMD097I
4
8
7
6
2
1
5
3
EAMD082I
Torque
18 kg
•
m
