Daewoo PROline VR516, Operating Instructions Manual

Quick-start guide

Please follow the guide from the beginning to the end. Before you connect the video
equipment make sure all equipment is switched off at the plug.

Stage 1. 

Connecting the video to your TV

A 

Fit the batteries we have provided into the remote

control. Make sure that the (+) and (-) marks on the
batteries agree with the (+) and (-) marks inside the
battery compartment.

B 

Plug your aerial into the ANT IN socket of the video.

C 

Connect the black aerial lead provided from the ANT

OUT socket of the video to your TV aerial socket.

D 

Plug the video into the mains and turn it on by

pressing the POWER or

button. RF 52 will now be

displayed on the front of your video.

AC 230V

50Hz

Back view of your video

There are more details, including how to connect extra equipment, on pages 4 to 6.

Stage 2. 

Tuning in your TV

A 

Tune a spare channel of your TV until you see the blue ‘AutoSet’

or ‘AutoSearch’ screen. Store this setting on your TV.

B 

If there is any distortion (lines, flickering and so on), the video

usually recommends a new ‘RF’ number during the next stage (auto
set or auto search). Press OK to confirm the new number. Should the
video not recommend a new number, see option 2 or 3 on page 7.

AUTO SET or AUTO SEARCH!

OK:CONFIRM          MENU:END

Stage 3. 

Auto Set! 

or

Auto Search! (When you have got a clear picture)

A 

Point the remote control at the video and

press 

OK

.

B 

The video is now tuning all the television

stations available in your area.

C 

If ‘Clock Set’ appears on the TV screen,

please enter the time and date. Use the
number buttons 

0

to 

9

on the remote control.

Press 

OK

to confirm. 

D 

When ‘Manual Set’ appears on the TV

screen, press 

MENU

to end.

F 

Your video is now set up. If you want to

change station names or the programmes
they are stored on see pages 11 and 12.

AUTO SET or AUTO SEARCH!

OK:CONFIRM          MENU:END

AUTO SET or AUTO SEARCH

MENU:END

PR03

UHF - - - - - - - -    - - - - - - 

76%

MANUAL SET

PR01 P-01

PR08 P-08

PR02 P-02

PR09 P-09

PR03 P-03

PR10 P-10

PR04 P-04

PR11 P-11

PR05 P-05

PR12 P-12

PR06 P-06

PR13 P-13

PR07 P-07

PR14 ----

PR+/-:SELECT
OK:CONFIRM      MENU:END

TV/VCR

SV/V+

PR

PR

MENU

EJECT

PAL/SEC

A.SEL

AV

SP/LP

INDEX

1

2

3

4

5

6

7

8

9

0

30

A

Important

: If you switch your video off at the mains overnight you do not have to retune the settings. Press 

and

then 

MENU

to restore all the settings. See page 8 to set the time and date. If you have had any problems setting up your

video , please read the problem-solving guide on page 31.