Installation guide
✽
Read these safety instructions carefully before use and follow precautions for your safety.
✽
This appliance is designed for DOMESTIC USE only.
Precautions in installation and power
connection
▪ To prevent fire, electronics shock or leakage.
①
.
Never install the refrigerator on a wek, watery
floor or where water can gather easily.
②
.
Check the following before power connection.
●
Connect power plug only to a grounded wall
socket
(an EARTHED mains)
③
.
Do not use an adapter plug or an extension cord.
④
.
Do not let the power cord be damaged by
other(heavy) objects.
⑤
.
Do not use the damaged power cord.
※
If you hear a strange noise, strong chemical
odour or find smoke etc. from the refrigerator after
the power is plugged in, pull out the plug
immediately and call the service agent.
Precaution in use
▪ To prevent personal injury, fire, electric shock etc. read
this user guide carefully before use and keep it at hand
for any reference.
**General installation tips**
Leave the appliance to stand for
2 - 4 hours at least
before switching on to allow the gases to settle.
Wait 2-3 hours
until the inside gets cold enough after the first power plug-in, then store foods inside.
There can be some smell on initial operation of the refrigerator after plugging in. The smell fades away as the refrigerator
works and doors are opened and closed.
The appliance can be noisy for
first 7-10 days
whilst the gases settle.
The door seals may seem very tight for the first few days. This is normal and does not indicate a fault.\
