72
Before doubting about troubles (VCR)
• “Power On” does not work.
• It does not work even in “Power
On”.
Checks
Symptom
■
Power
➤
Please check whether a power plug is inserted in an electric outlet.
➤
Please check whether a videotape is inserted in.
➤
Try to insert a plug again.
• A channel on video and a play
screen does not appear.
• Noise (screen noise) appears on
screen.
■
Screen and noise
➤
Please check your antenna’s connection.
➤
TV channel should be fixed on video channel.
➤
Please check your antenna’s signal whether it may be weak. In
case of its weakness, please use a frequency amplifier connected
with the device.
➤
Press “TV/VCR” and then let “VCR” is displayed on the display
panel.
➤
While in no use of VCR, was it turned on?
➤
While in recording a program, do you watch another channel?
➤
Select TV by pressing [TV/VCR] button on the remote control.
• A videotape is not inputted in.
• On inputting a videotape, the tape
is re-ejected.
• A videotape is not ejected.
■
Input and ejection
➤
Please check whether a power plug is inserted in an electric outlet.
➤
Please check whether a videotape is in.
➤
Please check whether a videotape is inserted in a right direction (a
side of transparent window should be on the upside)
➤
Have you inputted a videotape again just after the tape was
ejected? Please try it again after fully ejecting it.
➤
When a videotape forces to be ejected, the tape may not be
inputted. In the case, please pull out an outlet, and then push the
tape smoothly.
➤
That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
➤
In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull
out a power plug for about 10mins and then press “EJECT” button.
DVD-Video(PAL) 02.3.15 5:45 PM ˘
`
72
