Voltage Selection
Your kettle can function at two voltages (120V AC and 230V AC) and
the correct voltage for your region MUST be selected using the
switch found on the base of the kettle, otherwise serious damage
may be caused to the kettle which would not be covered by any
warranty or guarantee
Instructions for use
•
Place the kettle on a flat, level, non-flammable surface
•
Open the lid off and fill the kettle with water to the desired level ensuring
that it is above the MIN mark and below the MAX mark.
•
Close the lid on the kettle by pushing it closed and place it onto the base.
•
Insert the mains plug (with dry hands) into the mains socket and switch on
if applicable.
•
Push down the power on/off switch which will illuminate the Power Indicator
Light and the water will begin to boil.
•
At the end of the boiling cycle the power on/off switch will automatically
switch off.
•
Wait until the water has finished boiling before removing it from the base
unit.
•
Ensure the lid is correctly closed before pouring boiling water – beware of
scalding.
•
CAUTION: The travel cups can get hot when filled take care to avoid burns.
•
The coffee/sugar canister must be kept upright to avoid spillages.
Cleaning your kettle
•
Do not clean your kettle in a dishwasher.
•
Always disconnect the kettle from the mains power supply before
cleaning.
•
Wipe clean the outside of the kettle with a soft damp cloth. Never
