Ensure the outer sheath of
the mains lead is securely
held by the cable clamp
Connect Blue to
Neutral (N)
Connect Green &
Yellow to Earth (E)
Connect Brown to
Live (L)
• The Blue wire must be connected to the terminal marked N or
coloured Black.
• The Brown wire must be connected to the terminal marked L or
coloured Red.
• The Green and Yellow wire must be connected to the terminal
marked E or coloured Green.
• Check that there are no cut or stray strands of wire inside the plug.
• Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.
• If you are in any way unsure which plug or fuse to use, always refer
to a qualified electrician.
• After replacing or changing a fuse on a moulded plug, the cover must
be refitted to the plug; the appliance must not be used without a fuse
cover.
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug
has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the
discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must
be connected as shown below. The wires in the mains lead fitted to this
appliance are coloured in accordance with the following code:
Digital Air Fryer
SDA1804
User Manual
Summary of Contents for SDA1804
Page 1: ......
