7
750W Food Processor
Model No. SDA2100
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Before Using Your Food Processor
•
Remove all packing materials and discard responsibly.
•
Check that all parts are present
–
see
Description of Parts
above.
•
Before using the blender for the first time,
it is recommended to wash all parts
except the motor housing in warm soapy water, rinse and dry thoroughly.
•
Never immerse the motor housing unit in water or other liquids.
CAUTION: the blades inside the jug are not removable and are very sharp;
extreme caution should be taken whilst cleaning the inside of the jug.
The blade attachments are very sharp
–
care must be taken whilst cleaning the
blades.
CAUTION: NEVER BLEND OR PROCESS HOT OR WARM FOODSTUFFS OR
LIQUIDS.
Safety Lock System
This appliance is equipped with a safety lock system which will prevent the
motor starting without correct installation of the bowl and its lid.
CAUTION: DO NOT connect to the mains supply until the food processor is fully
assembled.
To activate the food processor, follow the below instructions:
1.
Place the
Housing Unit
(10) on solid, level, non-flammable
surface.
2.
Place the
Lid
(6) onto the
Processing Bowl
(5) and
turn the
Processing Bowl Lid
(6) clockwise until it
clicks into place.
The lid has an activator to trigger the safety lock
system and must be fitted and locked into place onto
the Processing Bowl
(5)
, before placing onto the
Housing Unit
(10)
.
3.
Insert the
Driver
(A) into the
Housing Unit
(10).
4.
Place the
Processing Bowl
(5) with
Lid
(6) over the
Driver
(A) and position onto the
Housing Unit
(10) with
the handle to the right, turn clockwise until it clicks
into place.
If the Processing Bowl
(5)
and Lid
(6)
are not
correctly locked into place, the food processor will
not operate.
6
5
A
10
