S0102000
Page 14
Track Excavator Safety
Never attempt to alter or modify any type of
protective structure reinforcement system, by
drilling holes, welding, remounting or relocating
fasteners. Any serious impact or damage to the
system requires a complete integrity
reevaluation. Reinstallation, recertification and/
or replacement of the system may be
necessary.
Contact your Daewoo distributor for available
safety guards and/or recommendations if there
is any danger of getting hit by objects that could
strike the operator's cab. Make sure that all
other work site crew members are kept well
away from the excavator and safe from possible
hazards.
For breaker operation, install a front guard and apply a laminated coating sheet to the front glass. Contact
your DAEWOO distributor for recommendations.
When carrying out demolition or cutting operation, install a front guard and top guard, and apply a
laminated coating sheet to the front glass.
When working in mines or quarries where there is danger of falling rock, install FOPS (Falling Objects
Protective Structure) and apply a laminated coating sheet to the front glass.
If any glass on the machine is broken, replace it with new glass immediately.
ATTACHMENT PRECAUTIONS
Option kits are available through your dealer. Contact Daewoo for information on available one-way (single-
acting) and two-way (double-acting) piping / valving / auxiliary control kits. Because Daewoo cannot
anticipate, identify or test all of the attachments that owners may wish to install on their machines, please
contact Daewoo for authorization and approval of attachments, and their compatibility with options kits.
ACCUMULATOR
The pilot control system is equipped with an accumulator. For a brief period of time after the engine has
been shut down, the accumulator will store a pressure charge that may enable hydraulic controls to be
activated. Activation of any controls may enable the selected function to operate under force of gravity.
When performing maintenance on the pilot control system, the hydraulic pressure in the system must be
released as describe in “Handling of Accumulator” in the Operation and Maintenance Manual.
The accumulator is charged with high-pressure nitrogen gas, so it is extremely dangerous if it is handled in
the wrong way. Always observe the following precautions;
•
Do not drill or make any holes in the accumulator or expose it any flame, fire or heat source.
•
Do not weld on the accumulator, or try attaching anything to it.
•
When carrying out disassembly or maintenance of the accumulator, or when disposing of the
accumulator, the charged gas must be properly released. Contact your Daewoo distributor.
•
Wear safety goggles and protective gloves when working on an accumulator. Hydraulic oil under
pressure can penetrate the skin and cause serious injuries.
HAOA100L
Figure 10
Summary of Contents for Solar 470LC-V
