3. Operation
VMCTOPES8D51
3. Operation
In this section, the method are explained with the process and the devices, which are necessary
for each step from power ON to power OFF after end of work.
The contents below is showing overall process and main work.
1. Before operation, fully understand the machine specifications in machine instruction
manual.
2. Programmer must understand fully the contents in NC instruction manual.
<Contents>
Item
Description
Remark
Page
3.1
Power on
– To prepare the operation
3 – 1
3.2
Warming-up
– Check the main function
3 – 2
3.3
Set-up
– Prepare/check tools and workpiece
3 – 3
3.4
Automatic operation
– Test operation /Cutting
3 – 16
3.5
Stop operation
– Stop during operation
3 – 20
3.6
Power operation
– Finishing wrok and power off
3 – 23
3.7
Inspection/maintenance
– Prevent trouble and maintain
3 – 34
Operation
3 – 0
