7
Tornado Cylinder 700W Cyclonic Vacuum
FLR00046
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
7
Care and Use of your Vacuum Cleaner
WARNING
Always disconnect the cleaner from the mains power supply before cleaning.
•
Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or abrasive
cleaners.
•
Do not submerge the cleaner in water or any other liquids.
•
Empty the
Dust Compartment
(9) as soon as the ‘MAX’ line is reached.*
•
Wash the Hepa, Sponge and Cyclonic Filters regularly
–
see table below.
•
Allow all the filters to thoroughly dry out for 24 hours before reassembly and use.
*WARNING
do not
continue to use your vacuum cleaner once the ‘MAX’ mark has been
reached as permanent damage may occur to the appliance.
Recommended cleaning times
Filter Type
Recommended cleaning period
WARNING
Ensure the filters are cleaned periodically according to the table above, failure to
clean the filters regularly will severely impair the performance and permanent damage may
occur to the appliance.
7. Finally, remove the
Rear outlet & Hepa
filter
(3) and wash the filter clean
ensuring it is thoroughly dry before
reuse.
•
Shake out debris when you empty the dust
container
•
Rinse under warm water once a month
•
Allow to dry thoroughly for 24 hours before reuse.
•
Occasionally remove any dust/debris as necessary.
•
The filter should also be rinsed under warm water
once a month.
•
Allow to dry thoroughly for 24 hours before reuse.
•
•
Shake out debris once a month
•
Rinse under warm water once every 3-6 months
•
Allow to dry thoroughly for 24 hours before reuse.
Round Hepa Filter
Round Sponge Filter
Rear Outlet Hepa
Filter
Cyclonic Filter
•
Shake out debris once a month
•
Rinse under warm water once a month.
•
Allow to dry thoroughly for 24 hours before reuse.
