19
ADJUSTMENT OF THE TPAE TRANSPORTING SECTION.
Generally, tape transporting section has been precisely adjusted in the factory and does not require the ordinary readjustment.
But there is the case that tape noise or impact on the deck mechanise, tape transporting section readjustment is required, in
adjustment of the tape tranmission section consut the following flow chart.
If any components shown in Fig. 5.1, tape transporting section will be changed. To readjust the change of tape transporting sec-
tion, keep in mind and follow the following check points.
FIg.5.1 A schematic diagram of the tape transporting section
