ENGLISH
8
TROUBLESHOOTING GUIDE: Possible operational
problems
PROBLEM
RECOMMENDATION
The regulator control
does not light up
when the switch is
turned on
Check that the mains has voltage, and that
the product
is properly plugged in.
After a certain
operation time, the
temperature of the
bootie seems to
reduce.
The product has an auto-stop system
that activates after 3hours of continuous
operation. After this time, the light on the
regulator starts to flash.
If you want to continue to use it, change
the temperature level to level 0, wait a
few seconds, and then select the desired
temperature.
The product reaches temperatures between 50º and 60 ºC in its
interior. This information is meant as a guide only. Measurements
are carried out in laboratory conditions, depending on the procedure
described in the standard UNE-EN 60335-2-81.
PRODUCT DISPOSAL AND CONSERVATION
PRODUCT CONSERVATION
Unplug the product when you do not intend to use it for an exten-
ded period of time to prolong its shelf-life. Store it in its original
packaging in a dry place, trying to fold it as little as possible and
preventing the formation of creases.
Do not cover the product with other heated elements during its ope-
ration. Let it cool down prior to storage. Do not place any objects on
top of the product during storage in order to prevent the formation
of creases.
PRODUCT CLEANING
Do not wash the outside of the product with water or dry clean.
Remove the inner sleeve, as this can be washed. Put this in this
same section instead of another separate one.
Wash the outside with a brush or with a dampened cloth.
CLEANING OF THE COVER
Flexyheat BM comes with an inner removable microfibre washable
cover. (Fig. 2)
Remove the cover from the bootie prior to cleaning it.
The wrap can be washed by hand or in the machine, using liquid
soap at a temperature not exceeding 30 °C and selecting a program
for washing delicate garments.
We recommend using a washing bag to prevent the damage of the
