SG-288 Manual V1.1
Dagama Confidential
© All Rights Reserved
SG-288 Manual V1.1
15
$GPMSS
This message transfers information about radio beacon signal-to-noise ratio, signal strength,
frequency, etc.
Following is an example.
$GPMSS,55,27,318.0,100,1,*57
The $GPMSS message format is shown below.
(1)
Fields marked in italic red apply only to NMEA version 2.3 (and later) in this NMEA message description.
Field
Example
Unit
Notes
Message ID
$GPMSS
MSS protocol header.
Signal Strength
55
dB
SS of tracked frequency.
Signal-to-Noise Ratio
27
dB
SNR of tracked frequency.
Beacon Frequency
318.0
kHz
Currently tracked frequency.
Beacon Bit Rate
100
Bits per second.
Channel Number
(1)
1
The channel of the beacon being used if a
multi-channel beacon receiver is used.
Checksum
*57
<CR> <LF>
Message terminator.