Install the lever on the switch mount with the M3 x 8
screw and M3 lock nut as shown in the drawing
NOTICE!
Make sure the motor pinion makes good contact with the crown gear!
Step 6: Installing the motor
Step 5: Installing the switch lever
Switch lever
Screw M3 x 8
Lock nut M3
Step 7: Installing the panel mount support
Panel mount support
2 pcs.
Screw M3 x 20
Lock nut M3
Install the 2 pcs. panel mounts as shown on the drawing:
Motor holder
Motor
Detail of motor wire connection
Assemble the motor as shown on the drawing. In this step you need
the wired motor and motor holder.
blue wire of
the motor
Blue wire
NOTE
Twist the wire spirally around
the screwdriver as shown on the
drawing.
Slide the wire off the screwdriver
shaft.
Now you have a nice looking
wire spiral which simply can
be bend and enlarged.
Now all the wiring of the solar
car looks very professional!
NOTE
Use the wrench and screwdriver to fix the lock nut.
English
