background image

6. Disclaimer

The conditions of installation, operation, using and maintenance of the modules shown in this manual are beyond 
the controlling range of DAH Solar, lead to any personal injury or property lose during the installation, operation, 
using and maintenance, and any non DAH Solar product defect caused disputes, DAH Solar does not bear any legal 
responsibility.

Intellectual Property: DAH Solar is not responsible for any infringement of intellectual property rights or other rights 
of third parties due to the use of component products, the customer does not obtain any intellectual property rights 
or relevant use authorization for use of the products, whether express or implied.

DAH Solar reserves the right to modify the manual, PV products, specifications or product information, the modifica-
tion of any information may be due to business requirements, technical level or other objective environment, but it 
does not represent the negation of the original information.

Information of this manual is reliable knowledge and experience of DAH Solar, including but not limited to all the 
above information and advice, but all the above information and related suggestions, whether express or implied, 
does not represent the only, proprietary methods, also does not pose any safety and quality warranty.

15

/

16

P V   M O D U L E   I N S T A L L A T I O N   M A N U A L

P V   M O D U L E   I N S T A L L A T I O N   M A N U A L

Summary of Contents for DHM50 5BB Series











Reviews: