Chapter 1 General Information
After setting the combined design, the system can compile that design to generate a new
one and save it to the memory card. The newly generated design can be used for embroidering,
output or other operations.
21
、
Letter Design
There are 28 letter-bases altogether. Users can make groups and change the letter order
according to different tasks. This operation is simple and easy managing.
22
、
Design Editing
By using this function, users may insert, modify or delete certain stitch at the selected
point. New designs can be created with this function too.
23
、
Speed Adjustment
The highest speed for embroidery can be preset. During the process of embroidery, speed
changes automatically as long as the needle interval changes.
24
、
Thread-trimming
Thread-trimming can be manually controlled. The machine can trim the thread
automatically at the end of embroidery process or color-changing.
25
、
Thread-breakage Detection
In case of thread breakage or running-out of bottom thread, the machine will stop and give
the warning by blinking the indicator.
26
、
Color-changing
At the color changing point, user can either perform the color-changing manually or let
the system do it according to the preset order automatically.
27
、
Cording Embroidery
The cording embroidery enriches the type of the embroidery of the system.
1.3 Technical Specifications
1
、
Maximum number of designs saved into memory: 400
2
、
Memory capacity: 100,000,000 stitches
3
、
Resolution
：
800*480
4
、
Network port speed
：
10Mbps
5
、
Supported method for data exchange
：
Floppy disk, USB Disk and network
6
、
Control precision: Minimum controllable stitch interval is 0.1mm.
7
、
Stitch range
：
0.1mm~12.7mm
6 Owner’s Manual of BECS- 285A Computerized Control System
