Chapter 2 Embroidery Guide
saved. Move frame to start point right now?” will appear when entering the main interface.
Click
and the frame will automatically return to the start point.
III.
Assistant Operation
After choosing the design, the user will enter the main interface, and he can do the needed
assistant operations before embroidery.
1.
Set repetition, rotation and scaling
— —
click
to enter the parameters
management interface.
2.
Set the color-changing order
——
click
, the system will have access to the
color-changing interface.
3.
Set appliqué
——
click
to have access to the Design Management interface.
Click Other Operation to set the appliqué of design.
4.
For border inquiry, brooder idling. embroider standard line, embroider cross,
embroider line, embroider outline of design, user can click
to have access to Other
Functions. Click
to have access to Assistant Operation interface
5.
Locate the design for embroidery at the center of frame.
——
Click
to have
access to Other Functions. Click
to have access to the Assistant Operation interface.
Attention: This function is to locate the soft limit to the center of the frame.
6.
Save Start Point of Design
——
Click
to have access to Other Function for the
further operations. Click
to have access to the Assistant Operation interface. Attention:
user should set the frame origin before using the function for saving and restoring the start
point of design.
18 Owner’s Manual of BECS- 285A Computerized Control System
