Chapter 6 Memory Design Management
6.12 High-Speed Design
With this function, those long stitch forms can be cut to short ones, which will keep the
embroidery speed at a high level.
1.
Click
in the main menu to enter the memory design management interface.
2.
Select the design in the memory design image area of the memory design
management interface.
3.
Click
to enter the design operation selection interface.
4.
Click “Hi-Speed Design” to enter its operation interface.
5.
If user doesn’t use the default values, click the design number and design name
and change them.
6.
Click
to create High-Speed Design and return to the design operation
selection interface. Click
to cancel the setting and interface.
6.13 Set Common Parameters for Color-changing
Each design has its setting of color-changing order and normal parameters such as
scaling up/down and repetition, which can be checked and set here.
1.
Click
in the main menu to enter the memory design management
interface.
2.
Select the design in the memory design image area of the memory design
management interface.
3.
Click
to enter the design operation selection interface.
4.
Click “Set design Params”,If the selected design is the current embroidering
design, the embroidery parameter setting interface will pop up. Please read Chapter 5
for reference.
If the selected design is not the current embroidering design, the non-embroidery design
parameter setting interface will appear.
Owner’s Manual of BECS- 285A Computerized Control System
65
