Chapter1 General Descriptions
not disassemble circuit boards.
Notice
If machine is inactive for a while, users must power on the machine
regularly (once in 2 or 3 days, more than an hour for each time).
Notice
If machine is inactive for a long time, users should have the machine
checked before power on.
Rejection
Notice
Rejection should abey the rules and regulations set by national indudstrial
electronic standards.
1-2 Main Features
1.
Operation box Screen
The screen is 5.7TFT.
2.
Stepping Precision
The minimum of stepping precision is 0.1 mm.
3.
Stitch Range
The stitch range is 0.1 mm -- 12.7 mm.
4.
Maximum of Memory Design Storage
The maximum is 200. (The maximum is 190 when the machine has been installed with
letter design library.)
5.
Design Storage Capacity
The system memory can store 2,000,000 stitches.
1-3 Main Functions
1.
Design Input and output and software upgrade from Floppy/USB Disk
Disk includes floppy disk and USB flash disk. The floppy disk is outside of the operation box
and connects by USB port.
1)
Design Input from Floppy/USB Disk
The computer can read a variety of designs from floppy/USB disk, such as TAJIMA DSB,
TAJIMA DST, BARUDAN FDR, BARUDAN FDRIII, BARUDAN HD and ZSK
2)
Design Output to Floppy/USB Disk
The designs in computer memory can be output to floppy/USB disk. The designs are
output in Tajima DSB format, which can be used in internet transmission.
3)
The software of BECS-328 can be removed by floppy/USB disk.
BECS-328 Computerized Embroidery Machine's Manual
3
