Chapter1 General Descriptions
2.
English, Chinese or Spanish/Turkish/French Display
User can select software from Chinese/English/Spanish/Turkish//FrenchPortuguese , etc.
After software selection, user can select display language by keyboard operation. And the
operation keys use logo to avoid language limit.
3.
Adjusting Speed
The main shaft speed can be changed manually, or be changed automatically with the
length of stitches during embroidering.
4.
Trimming
The machine can trim thread by pressing keyboard manually, or do it automatically
during changing color or at the end of embroidering. (Except the machine types without
trimming device)
5.
Thread Break Detect
During embroidering, the machine will automatically stop and light the red stamp if the
thread is broken or is run out of.
6.
Color-changing Function
While processing one color-changing stitch, the machine can change color manually, or
change color automatically according to the preset color line.
7.
Repetition Embroidery
The machine can increase embroidery productivity by repetition embroidery which may
be used with cyclic embroidery. And it can do the normal repetition embroidery directly. To
do partial repetition, create and embroider a new design through the option “COMPILE
EMBROIDER. DESIGN” in the assistant management menu.
8.
Cyclic Embroidering
The machine also can increase embroidery productivity by preset cyclic
embroidering, by which the machine automatically starts another same embroidery
when one embroidery is finished.
9.
Combining Designs
A new design can be formed created by combining several normal designs with different
size ratio, rotation angle, design direction and relative distance, which is called combined
design and has an extension name of PAR. It can be embroidered at one time.
10.
Compiling Design
A.
Compiling the ready-for-embroider design
BECS-328 Computerized Embroidery Machine's Manual
4
