Chapter 3 How to Start Embroidey
3.
Embroidery running status
Features: machine is running, and the icons "
" do animation show.
How to switch among the above work statuses?
1.
In preparation status, after selecting pre-embroidery design and setting the parameters,
first press "
" key, and then press "
" key, now the machine is in embroidery confirmation
status. Finally, pull the embroidery bar to right to embroider, which means the machine is in
embroidery running status.
2.
In embroidery running status, pull the bar to left to stop, now the machine is in
embroidery confirmation status (Again, pull the bar to right, the machine goes into embroidery
running status).
3.
In embroidery confirmation status, first press "
" key, and then press "
" key to
release embroidery confirmation status, now the machine goes into preparation status.
3-1-2 The Icons at the Bottom of LCD Show the Embroidery Information
At the bottom of LCD on main picture, there are 10 icons to show embroidery information,
which meanings are as following:
1.
: The machine is in embroidery confirmation status.
: The machine is in preparation status.
2.
: The machine is in auto-color and auto-start mode.
: The machine is in auto-color and manual-start mode.
BECS-328 Computerized Embroidery Machine's Manual
10
