hapter 5 Color-changing Operation
Chapter 5 Color-changing Operation
5-1 Manual Needle-change (Color-changing) when Stop
Press the numeric keys to do manual color-changing operation when the machine stops.
If the needle number is more than 9, for example 10, you can press “
” and then “0” to
switch to the 10
th
needle.
5-2 Manual Color-changing and Manual Start during Embroidering
To set manual color-changing and manual start is as follows:
Under the embroidery preparation or confirmation status, press "
" key until the main
screen shows as follows.
The icon "
" appears.
If the machine is set into manual color-changing and manual start, manually perform the
color-changing and select the first needle position before starting embroidering operation, then
pull bar to start embroidery.
When the color-changing code is processing during embroidering operation, the machine
will halt automatically and the icon "
" appears for manual color-changing. At the moment,
the operator should press the digital key to carry out manual color-changing. After the
required needle position having been set, pull the operation bar to start embroidery (manual
start).
BECS-328 Computerized Embroidery Machine's Manual
23
