Chapter 7 Frame Operations
B.
Press “
" or "2" key to move the cursor to " RESTORE ORIGIN", and then press
"
" key to continue.
C.
The computer will prompts: “PRESS [HOME] KEY TO RESTORE ORIGIN”, and
you can press “
” to move the frame to the saved origin point. Otherwise, press any other
key.
7-4 Save Pattern
’
s Origin Point
This function could save the origin point for the pattern.
Operation:
A.
Press "
" key, the menu frame appears as follows:
①
BACK TO ORIGIN
②
RESTORE ORIGIN
③
SAVE ORIGIN
④
AUTO SET ORIGIN
⑤
FRAME TO BORDER
⑥
NDL DOWN&ORIGIN
B.
Press “
" or "3" key to move the cursor to " SAVE ORIGIN", and then press "
"
key to continue.
C.
The computer will prompts: “PRESS [HOME] KEY TO SAVE ORIGIN”, and you
can press “
” to save the origin point. Otherwise, press any other key.
7-5 Automatically Set the Origin Point
This operation must be after “Setting the Embroidery Frame Range” in assistant
management. (For details, read chapter 27 of the manual),
This function would calculate the origin point for the selected pattern, and move the frame
to the new origin point, which will make the pattern at the center of frame.
Operation:
A.
Press "
" key, the menu frame appears as follows:
BECS-328 Computerized Embroidery Machine's Manual
31
